skip to main text

Copying

This section describes how to load originals and copy them to plain paper.

  1. Open the paper support (A).

  2. Pull out the paper output tray (B) and the output tray extension (C).

  3. Load paper vertically against the far right of the rear tray WITH THE PRINT SIDE FACING YOU.

  4. Adjust the paper guide (D) with the paper left side.

    After loading paper on the rear tray, the Paper status and the current paper size flash on the LCD.

  5. Press Paper Select button (E) to select a paper size according to the paper loaded on the rear tray and press OK button (F).

  6. Open the document cover (G).

  7. Load the original WITH THE SIDE TO COPY FACING DOWN and align it with the alignment mark (H).

  8. Close the document cover.

  9. Press the Black button (I) or Color button (J).

Important

  • Do not open the document cover until copying is complete.

Note

  • Your printer is equipped with many other convenient copy features.